A micellar-enhanced fluorescence photoinduced four-way calibration method for the determination of multiclass pesticides in lemon juice.

In this work, a four-way multivariate calibration method for the simultaneous determination of four pesticides - carbendazim (CBZ), thiabendazole (TBZ), pirimiphos-methyl (PMM), and clothianidin (CLT) - in lemon juice is presented. Third-order data were acquired by registering the photoinduced fluorescence of the analytes as excitation-emission matrices at different times of UV-light irradiation, in the presence of organized media (direct micelles) as fluorescence enhancers. The optimal experimental conditions (pH 11.5 and 32 mmol L-1 hexadecyltrimethylammonium chloride surfactant) were determined through a central composite design using the response surface methodology. The analytes were individually calibrated, except for TBZ and CBZ due to the inner filter effect of TBZ on CBZ. Test samples containing all analytes and imidacloprid (as potential interference) were analysed. PARAFAC was utilized to evaluate both the trilinearity and quadrilinearity of the third-order data and four-way arrays, respectively. PMM was successfully determined with quadrilinear PARAFAC decomposition, whereas CLT, TBZ, and CBZ were satisfactorily modelled using U-PLS/RTL due to the loss of quadrilinearity caused by different phenomena. The profitable applicability of the analytical method in the CBZ, TBZ, PMM, and CLT determination in lemon juice samples was demonstrated, achieving limits of detection below the maximum residue levels reported by the European Commission, and mean recoveries at 90 ± 5%.

Electroanalytical overview: the sensing of carbendazim.

Carbendazim is a broad-spectrum systemic fungicide that is used to control various fungal diseases in agriculture, horticulture, and forestry. Carbendazim is also used in post-harvest applications to prevent fungal growth on fruits and vegetables during storage and transportation. Carbendazim is regulated in many countries and banned in others, thus, there is a need for the sensing of carbendazim to ensure that high levels are avoided which can result in potential health risks. One approach is the use of electroanalytical sensors which present a rapid, but highly selective and sensitive output, whilst being economical and providing portable sensing platforms to support on-site analysis. In this minireview, we report on the electroanalytical sensing of carbendazim overviewing recent advances, helping to elucidate the electrochemical mechanism and provide conclusions and future perspectives of this field.

Quantification of the benzimidazole opioid analog isotonitazene in human hair using liquid chromatography-tandem mass spectrometry.

Benzimidazole opioids were originally developed from the late 1950s to 1970s as analgesics for medical use, although a lot of them could not be approved as licit medicines because of their severe side effects and physical dependence. Such benzimidazole opioid analogs as abused drug, however, have recently been found in illicit drug markets throughout the world. Isotonitazene is one such benzimidazole opioids, whose analgesic potency can be as much as 500 times greater than that of morphine, according to previous animal studies. In line with this potency, a couple of hundred fatalities related to it were reported to date. In this study, a well validated method for the quantification of isotonitazene in human hair samples using liquid chromatography (LC)-tandem mass spectrometry (MS/MS) was established, and could be applied to authentic samples which were seized by the police security bureau. Isotonitazene concentrations in the seized hair averaged 6.11 pg/mg. The LLOQ and LOD of this method were 1.25 and 2.5 pg/mg, respectively; the calibration curve of the substance in hair samples showed a good linearity in the concentration range of 2.5-250 pg/mg (r > 0.999); the extraction recovery rates were 87.3-105% in the tested range; the inter- and intra-day precisions and accuracies (%biases) were not greater than 9.09% for each determination. Isotonitazene in human hair showed good stability at room temperature and under dark storage conditions for 30 days. As for matrix effect in hair samples, moderate ion suppression of target substances could be found. This is the first report for the analysis of isotonitazene in human hair samples.

Qualitative and quantitative analysis of four benzimidazole residues in food by surface-enhanced Raman spectroscopy combined with chemometrics.

In this study, surface-enhanced Raman spectroscopy (SERS) combined with chemometric methods were developed for qualitative and quantitative analysis of four benzimidazole (BMZs) residues in corn. Sulfhydryl functionalized Fe3O4@SiO2@Ag-SH magnetic SERS substrates were prepared to obtain the SERS spectra of four BMZs for chemometric analysis. The partial least squares regression discrimination analysis (PLS-DA) model performed best, with a recall rate upwards 99.17%, and could successfully distinguish four BMZs. Under the support vector machine regression (SVR) model, the detection limits of carbendazim, benomyl, thiophanate-methyl and thiabendazole were 0.055 mg/L, 0.056 mg/L, 0.067 mg/L and 0.093 mg/L, respectively; the average recovery was in the range of 85.6%-107.5%. Furthermore, the method verified by HPLC, and the results showed that there was no significant difference between two methods (p > 0.05). Therefore, the strategy based on SERS coupling chemometrics can be served as a promising tool for rapid determination of BMZs residues in food.

A Different Perspective on the Characterization of a New Degradation Product of Flibanserin With HPLC-DAD-ESI-IT-TOF-MSn and Its Pharmaceutical Formulation Analysis With Inter-Laboratory Comparison.

BACKGROUND: Flibanserin (FLB) was first synthesized as an antidepressant drug; however, due to its enhancing effects on sexual activity, it was approved for treatment of hypoactive sexual desire disorder in women in 2015. OBJECTIVE: The aim of this study was to develop a new and fully validated HPLC method for analysis of FLB in pharmaceutical formulations besides its degradation products, and identification of possible formation mechanisms by using HPLC-DAD-ESI-IT-TOF-MSn. METHOD: The HPLC separation was achieved in a Supelco Ascentis® Express series phenyl hexyl column (100 × 4.6 mm, ID 2.7 µm). The mobile phase was acetonitrile-ammonium acetate solution (50:50, v/v, 10 mM, pH 5.4) mixture, which was pumped at the rate of 0.5 mL/min. Chromatography, detection, and structural identification was performed by using a LCMS-IT-TOF instrument (Shimadzu, Japan). RESULTS: 1-(2-(4-(3-hydroxy-5-(trifluoromethyl)phenyl)piperazine-1-yl)ethyl)-1,3-dihydro-2H-benzo[d]imidazol-2-one is proposed as a novel degradation product, with a mass of 407.1695 and a formula of C20H21F3N4O2 with a margin of error about 0.001 ppm. The developed method is applicable with 98% accuracy within the 2.5-50.0 µg/mL range. The LOD and LOQ were about 500 ng/mL and 1.50 µg/mL, respectively. The transferability and variation between laboratories were tested by inter-laboratory comparison and evaluated with one-way analysis of variance. CONCLUSIONS: A novel FLB degradation product, which was produced under oxidative forced degradation conditions was observed and identified for the first time; in addition, the formation kinetics of the degradation product besides decomposition of FLB was studied. Furthermore, an inter-laboratory comparison was carried out, and application of the proposed method on a pseudo Addyi® (Sprout Pharmaceuticals, Inc.) sample was tested using both instrument configurations. HIGHLIGHTS: A novel stability-indicating assay method was developed and fully validated according to the International Council on Harmonization (Q2) R1 for the analysis of FLB in the pharmaceutical preparations. A new degradation product was identified in the oxidative forced degradation condition and characterized using HPLC-DAD-ESI-IT-TOF-MS3. Moreover, the possible mechanism and the formation kinetic of the degradation product were revealed. In addition, the developed method was transferred to another LC-PDA instrument for inter-laboratory comparison. Finally, the current method was applied to a pseudo formulation of Addy in both instruments, and ANOVA was applied for evaluation.

Degradation of carbendazim in aqueous solution by dielectric barrier discharge cold plasma: Identification and toxicity of degradation products.

Dielectric barrier discharge (DBD) cold plasma, as a new nonthermal technology, has attracted increasing attention in pesticide degradation. In this study, DBD plasma was used to degrade carbendazim (MBC) in aqueous solution. Under the optimal conditions (160 kv, 50 Hz), MBC solution (0.5 µg/mL) was degraded by 89.04% after plasma treatment for 10 min. Four MBC degradation products were identified, one of which was a common oxidative degradation product (5-hydroxycarbendazim, m/z 208.07); the others were identified (m/z 118.06, m/z 132.08 and m/z 104.05) to have formed by the cleavage of the benzimidazole heterocyclic ring. The degradation pathways were obtained by analysis of degradation products at different treatment times. The toxicity of the degradation products was estimated based on the survival rate of yeast, indicating much lower toxicity levels compared to that of MBC. This study provides a theoretical basis for the application of DBD plasma in the degradation of benzimidazole pesticides in foods.

Identification of Photocatalytic Alkaloids from Coptidis Rhizome by an Offline HPLC/CC/SCD Approach.

Natural products continue to be a valuable source of active metabolites; however, researchers of natural products are mostly focused on the biological effects, and their chemical utility has been less explored. Furthermore, low throughput is a bottleneck for classical natural product research. In this work, a new offline HPLC/CC/SCD (high performance liquid chromatography followed by co-crystallization and single crystal diffraction) workflow was developed that greatly expedites the discovery of active compounds from crude natural product extracts. The photoactive total alkaloids of the herbal medicine Coptidis rhizome were firstly separated by HPLC, and the individual peaks were collected. A suitable coformer was screened by adding it to the individual peak solution and observing the precipitation, which was then redissolved and used for co-crystallization. Seven new co-crystals were obtained, and all the single crystals were subjected to X-ray diffraction analysis. The molecular structures of seven alkaloids from milligrams of crude extract were resolved within three days. NDS greatly decreases the required crystallization amounts of alkaloids to the nanoscale and enables rapid stoichiometric inclusion of all the major alkaloids with full occupancy, typically without disorder, affording well-refined structures. It is noteworthy that anomalous scattering by the coformer sulfur atoms enables reliable assignment of absolute configuration of stereogenic centers. Moreover, the identified alkaloids were firstly found to be photocatalysts for the green synthesis of benzimidazoles. This study demonstrates a new and green phytochemical workflow that can greatly accelerate natural product discovery from complex samples.

An Improved POD Model for Fast Semi-Quantitative Analysis of Carbendazim in Fruit by Surface Enhanced Raman Spectroscopy.

The current detection method of carbendazim suffers from the disadvantages of complicated preprocessing and long cycle time. In order to solve the problem of rapid quantitative screening of finite contaminants, this article proposed a qualitative method based on characteristic peaks and a semi-quantitative method based on threshold to detect carbendazim in apple, and finally the method is evaluated by a validation system based on binary output. The results showed that the detection limit for carbendazim was 0.5 mg/kg, and the detection probability was 100% when the concentration was no less than 1 mg/kg. The semi-quantitative analysis method had a false positive rate of 0% and 5% at 0.5 mg/kg and 2.5 mg/kg, respectively. The results of method evaluation showed that when the added concentration was greater than 2.5 mg/kg, the qualitative detection method was consistent with the reference method. When the concentration was no less than 5 mg/kg, the semi-quantitative method is consistent between different labs. The semi-quantitative method proposed in this study can achieve the screening of finite contaminants in blind samples and simplify the test validation process through the detection probability model, which can meet the needs of rapid on-site detection and has a good application prospect.

Multi-class, multi-residue determination of 132 veterinary drugs in milk by magnetic solid-phase extraction based on magnetic hypercrosslinked polystyrene prior to their determination by high-performance liquid chromatography-tandem mass spectrometry.

A quantitative multi-class multi-residue analytical method was developed for the determination of veterinary drugs in milk by high-performance liquid chromatography - tandem mass spectrometry (HPLC-MS/MS). A total of 132 veterinary drugs investigated belonged to almost 15 classes including sulfonamides, ß-lactams, tetracyclines, quinolones, macrolides, nitrofurans, nitroimidazoles, phenicols, lincosamides, pleuromutilins, macrocyclic lactones, quinoxaline antibiotics, benzimidazoles, anthelmintics, coccidiostats and some others. A magnetic solid-phase extraction procedure was developed using magnetic hypercrosslinked polystyrene (HCP/Fe3O4) for the sample preparation prior to HPLC-MS/MS without deproteinization step. The results indicated recoveries of 85-107% for 14 sulfonamides, 85-120% for 13 ß-lactams, 89-115% for 4 tetracyclines, 82-119% for 14 quinolones, 82-115% for 8 macrolides, 97-109% for 4 nitrofurans, 84-115% for 10 nitroimidazoles, 89-114% for 3 phenicols, 86-111% for 3 lincosamides, 97-102% for 2 pleuromutilins, 72-88% for 4 macrocyclic lactones, 87-104% for 4 quinoxaline antibiotics, 76-119% for 21 benzimidazoles, 79-115% for 12 anthelmintics, 81-118% for 12 coccidiostats and 75-119 % for 5 unclassified drugs, with relative standard deviations (RSDs) of less than 20%, and the LOQs ranged from 0.05 to 1 µg kg-1. This methodology was then applied to field-collected real milk samples and trace levels of some veterinary drugs were detected.

Development and validation of a novel evaporation setup-assisted TLC method with fluorescence detection for determination of flibanserin in pharmaceutical and biological samples.

A specific and sensitive thin layer chromatographic method coupled with fluorescence detection for determination of flibanserin (FLN) that treats woman hypoactive sexual desire disorder was developed. The proposed method depends on the enhancement of FLN native fluorescence intensity via the exposure of the developed TLC plate to concentrated hydrochloric acid vapors. Herein, an evaporation setup needed for HCl vapors exposure step was designed for the first time to ensure a uniform distribution of the vapors throughout the developed bands on the plate. Chloroform: methanol (9.5: 0.5, v/v) was the optimum mobile phase that gave a compact band (Rf= 0.44 ± 0.02) using TLC aluminium plates precoated with silica gel G 60F254 as a stationary phase. After exposure of the developed TLC plate to HCl vapors, the FLN bands emission intensities were measured after excitation at 275 nm. Conferring ICH guidelines, the linearity range was 20.0 - 1500.0 ng/band with a good linear relationship (r= 0.9998). Detection and quantitation limits were 5.12 and 15.50 ng/band, respectively. Also, the method was validated for accuracy, precision, robustness, specificity and selectivity. Statistical analysis verified the suitability of the proposed method for estimation of FLN in tablets and in human plasma with acceptable recoveries (98.07-101.45%).

Ultrasensitive photoelectrochemical aptasensor for carbendazim detection based on in-situ constructing Schottky junction via photoreducing Pd nanoparticles onto CdS microsphere.

Carbendazim (CBZ) has been widely used in agricultural production to control fruits and vegetables diseases, but it can also destroy the human endocrine system. Therefore, sensitive detection of CBZ has attracted increasing attention worldwide. In this study, Pd nanoparticles (Pd NPs) decorated on CdS microsphere (Pd NPs/CdS) was prepared by the in-situ photoreduced method, and based on the surface plasmon resonance (SPR) effect of noble metal and Schottky junction between Pd nanoparticles (Pd NPs) and CdS microsphere, the photocurrent after introducing Pd NPs is 7.7 times higher than that of bare CdS microsphere. In view of the outstanding photoelectrochemical (PEC) performance of Pd NPs/CdS and the high specificity of the aptamer, the as-fabricated PEC aptasensor for CBZ detection possesses the excellent detection performance including a broad linear ranging from 1.0 × 10-12 to 1.0 × 10-6 mol/L as a low detection limit of 3.3 × 10-13 mol/L (S/N = 3). Furthermore, the PEC aptasensor was used for determination of lettuce samples from actual agricultural products with satisfactory results.

Fabrication of platinum-doped NiCo2O4 nanograss modified electrode for determination of carbendazim.

In this study, a platinum-doped nickel cobaltite nanograss (Pt-doped NiCo2O4 NG) with its own unique structural features was initially synthesized, utilizing a simple hydrothermal method and then applied as a novel platform for the detection of carbendazim (C9H9N3O2; CBZ). To this end, the CBZ electrochemical signals were evaluated by means of differential pulse voltammetry (DPV), demonstrating the acceptable catalytic effect of the Pt-doped NiCo2O4 NG/screen-printed electrode (SPE) on the CBZ oxidation signal. Under the optimized conditions, CBZ was subsequently quantified by the Pt-doped NiCo2O4 NG/SPE with a wide linear range (0.03-140 µM) and a low limit of detection (LOD) value (0.005 µM). The proposed sensor was thus characterized by good anti-interference ability, selectivity, and stability. The analysis of the real samples, viz. tomato and lettuce, also confirmed that the given sensor had good recoveries and relative standard deviation (RSD). Ultimately, a comparison between liquid chromatography-mass spectrometry (LC-MS) and this method established no significant difference in the results.

Flowerlike Ni-NiO composite as magnetic solid-phase extraction sorbent for analysis of carbendazim and thiabendazole in edible vegetable oils by liquid chromatography-mass spectrometry.

A rapid, selective, and sensitive method was developed for the detection of carbendazim and thiabendazole in edible vegetable oil. Two benzimidazole analytes were pre-concentrated by magnetic solid phase extraction (MSPE) using flowerlike Ni-NiO composite as sorbents and followed by LC-MS/MS analysis. The flowerlike Ni-NiO composite sorbent displayed a high affinity towards benzimidazole analytes due to the reversible coordination interaction between the Ni(Ⅱ) ion and the electron-donating imidazole group. In comparison to the previous methods, this procedure is less time-consuming and simpler during sample preparation. The parameters affecting the extraction efficiency were optimized in detail. The method was validated according to SANTE/12682/2019. The limits of detection were in the range of 0.001-0.003 mg•kg-1. The recoveries ranged from 89.3% to 110.7% with inter-day and inter-day precision less than 10.9%. The results indicate that flowerlike Ni-NiO composite might be a promising alternative for MSPE of benzimidazole compounds in foods.

Simple method for the determination of anthelmintic drugs in milk intended for human consumption using liquid chromatography-tandem mass spectrometry.

BACKGROUND: Helminth infections in animals to be consumed by humans are an important medical and public health problem. Pharmaceutical research has focused on developing new anthelmintic drugs for parasite control in these animals. However, the incorrect use of anthelmintics can leave residues in animal products intended for human consumption. Their determination is therefore crucial in terms of food safety. RESULTS: In this work, a simple and sensitive method has been developed for the analysis of anthelmintic drugs in milk. The method involves extraction of the analytes using a QuEChERS (quick, easy, cheap, effective, rugged, and safe) method, and separation and determination by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The use of a core-shell column significantly reduced the analysis time compared with conventional columns. The method was validated and applied to the analysis of different commercial milk samples: whole, semi-skimmed and skimmed cows' milk, and goats' milk. None of the benzimidazoles studied was found in the samples analyzed, so these were spiked with the analytes at three concentration levels (10, 50, and 100 µg kg-1 ). CONCLUSIONS: The proposed method provided high sensitivity compared with other methods for the determination of anthelmintics in milk samples, at concentration levels well below the established maximum residue limit (MRLs) values. The proposed method is simple, easy, precise, accurate, and leads to good recovery levels. It can be used successfully for the routine analysis. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Easy and effective analytical method of carbendazim, dimethomorph, and fenoxanil from Protaetia brevitarsis seulensis using LC-MS/MS.

Traditionally in Korea, Protaetia brevitarsis seulensis (white-spotted flower chafer) has been used as a medicine, and recently has attracted increased attention due to its antithrombotic efficacy. Some of spent mushroom compost or fermented oak sawdust, a feedstock for P. brevitarsis, were contaminated with three fungicides, carbendazim, dimethomorph, and fenoxanil, which could be transferred to the insect. This study was aimed to optimize a simple extraction method combined with liquid chromatography tandem mass spectrometry and apply it to the real samples. After the pulverized samples (5 g) were extracted with acetonitrile (10 mL) and formic acid (100 µL), fat and lipids in the samples were slowly precipitated at -20°C for 24 hours. After eight different clean-up methods were investigated, the mixture of 150 mg MgSO4/25 mg PSA/25 mg C18 was selected due to optimal recovery of the target compounds. Recovery (77.9%‒80.8% for carbendazim, 111.2%‒116.7% for dimethomorph, and 111.9%‒112.5% for fenoxanil) was achieved with reasonable relative standard deviation (<5.5%) The analytical method developed in this study was used to analyze three compounds in the 24 insect samples donated by the insect farm owners but no target compounds were detected. These results can provide important data for establishing the pesticide safety standards for P. brevitarsis before the medical applications.

Matrix solid-phase dispersion based on cucurbit[7]uril-assisted dispersive liquid-liquid microextraction coupled with high performance liquid chromatography for the determination of benzimidazole fungicides from vegetables.

A new method involving matrix solid-phase dispersion (MSPD) and dispersive liquid-liquid microextraction (DLLME) was optimized with the aid of stoichiometry and applied to the extraction, purification, and determination of benzimidazole residues in vegetables. Carbendazim, thiabendazole, and thiophanate-methyl were selectively extracted from vegetables using cucurbit[7]uril as the MSPD extractant and transferred to an aqueous solution, then further enriched using DLLME with acetonitrile and chloroform as dispersive and extraction solvents, respectively. The optimal extraction conditions of MSPD and DLLME were selected by two-level full-factorial design and central-composite design (CCD). The developed method (MSPD-DLLME-HPLC-UV) showed good linearity in the range of 0.025-5 µg/g, with R2 > 0.9984. Intra- and interday precisions were 5.3-10.9% and 10.6-12.4%, respectively, and the limit of detection was between 0.004 and 0.007 µg/g of fresh weight. This method was applied to the analysis of four different types of vegetables, and the recoveries ranged from 65.4% to 124.0%. The method was environmentally friendly, easy to operate, and sensitive.

Electrochemical detection of carbendazim with mulberry fruit-like gold nanocrystal/multiple graphene aerogel and DNA cycle amplification.

An aptasensor for electrochemical detection of carbendazim is reported with mulberry fruit-like gold nanocrystal (MF-Au)/multiple graphene aerogel (MGA) and DNA cycle amplification. HAuCl4 was reduced by ascorbic acid in a CTAC solution containing KBr and KI and formed trioctahedron gold nanocrystal. The gold nanocrystal underwent structural evolution under enantioselective direction of L-cysteine. The resulting MF-Au shows a mulberry fruit-like nanostructure composed of gold nanocrystals of about 200 nm as the core and many irregular gold nanoparticles of about 30 nm as the shell. The exposure of high-index facets improves the catalytic activity of MF-Au. MF-Au/MGA was used for the construction of an aptasensor for electrochemical detection of carbendazim. The aptamer hybridizes with assistant strand DNA to form duplex DNA. Carbendazim binds with the formed duplex DNA to release assistant strand DNA, triggering one three-cascade DNA cycle. The utilization of a DNA cycle allows one carbendazim molecule to bring many methylene blue-labeled DNA fragments to the electrode surface. This promotes significant signal amplification due to the redox reaction of methylene blue. The detection signal is further enhanced by the catalysis of MF-Au and MGA towards the redox of methylene blue. A differential pulse voltammetric signal, best measured at - 0.32 V vs. Ag/AgCl, increases linearly with the carbendazim concentration ranging from 1.0 × 10-16 to 1.0 × 10-11 M with a detection limit of 4.4 × 10-17 M. The method provides ultrahigh sensitivity and selectivity and was successfully applied to the electrochemical detection of carbendazim in cucumber. This study reports on an ultrasensitive aptasensor for electrochemical detection of carbendazim in cucumber based on mulberry fruit-like gold nanocrystal-multiple graphene aerogel and DNA cycle double amplification.

[Examination of Analytical Method for Mothproofing Agents to Revise the Official Methods Based on "Act on the Control of Household Products Containing Harmful Substances"].

In Japan, the use of mothproofing agents [dieldrin and 4,6-dichloro-7-(2,4,5-trichlorophenoxy)-2-trifluoromethylbenzimidazole; DTTB] in textiles is regulated by the Act on the Control of Household Products Containing Harmful Substances. Since official analytical methods for these agents have been in place for approximately 40 years, we developed an improved method in a previous study. In the present study, we validated this method. Accordingly, six laboratories analyzed the sample prepared at 3 µg/g (1/10 of the regulation value) and 30 µg/g (the regulation value). The high accuracy of the results for these samples in almost all the cases (accuracy: 70-120%, repeatability: <10%, reproducibility: <15%), confirmed the validity of the method. In addition, we examined three samples that were distributed before the introduction of the regulation. The analysis results for these samples showed little variation between laboratiories, indicating that our method is also applicable to actual samples. Meanwhile, the quantitative value was clearly lower in one laboratory than in the others. We presumed that the enhanced effect of the sample matrix (matrix effect) on the internal standards in GC-MS analysis was the main cause for this trend. Therefore, we examined the analytical method using polyethylene glycol 300 (PEG) as an analyte protectant. As PEG minimized the GC-MS response difference between the standard solution and the matrix-containing solution, GC-MS analysis with PEG would be useful for matrix effect measurements in this method.

Facile synthesis of single-crystalline Fe-doped copper vanadate nanoparticles for the voltammetric monitoring of lethal hazardous fungicide carbendazim.

The highly selective and sensitive electrochemical detection of highly toxic fungicide carbendazim (CBZ) by the iron (Fe)-doped copper vanadate (CuVO4; CuV) is discussed. The Fe-doped copper vanadate (Fe-CuV) is prepared by the simple co-precipitation method followed by an annealing process which produced high crystallinity. The material properties of Fe-CuV are characterized by XRD, Raman spectrometry, XPS analysis, HRTEM, and SAED pattern. The electrochemical characterization of Fe-CuV towards CBZ detection are done by CV and DPV techniques. The Fe-CuV/GCE exhibits good electroanalytical activity towards the electro-oxidation of CBZ at the potential of 0.81 V vs Ag/AgCl. The developed sensor electrode revealed a linear range of 0.01 to 83.1 µM and a limit of detection of about 5 nM. In addition, Fe-CuV/GCE reveals good storage stability (RSD = 2.63%) and reproducibility (RSD = 2.85%) for the electro-oxidation of CBZ. The electrode material was applied to the detection of CBZ in apple juice and soy milk samples, and the results were discussed. Thus, our projected Fe-CuV/GCE can be employed as electrode material in a rapid onsite sensor for the detection and determination of noxious pollutants.

Secondary Effects of Hypochlorite Treatment on the Emerging Pollutant Candesartan: The Formation of Degradation Byproducts and Their Toxicological Profiles.

In recent years, many studies have reported the frequent detection of antihypertensive agents such as sartans (olmesartan, valsartan, irbesartan and candesartan) in the influents and effluents of wastewater treatment plants (WWTPs) and in the superficial waters of rivers and lakes in both Europe and North America. In this paper, the degradation pathway for candesartan (CAN) was investigated by simulating the chlorination process that is normally used to reduce microbial contamination in a WWTP. Twelve isolated degradation byproducts (DPs), four of which were isolated for the first time, were separated on a C-18 column by employing a gradient HPLC method, and their structures were identified by combining nuclear magnetic resonance and mass spectrometry and comparing the results with commercial standards. On the basis of these results, a mechanism of formation starting from the parent drug is proposed. The ecotoxicity of CAN and its DPs was studied by conducting a battery of ecotoxicity tests; bioassays were performed using Aliivibrio fischeri (bacterium), Daphnia magna (planktonic crustacean) and Raphidocelis subcapitata (alga). The ecotoxicity results shed new light on the increased toxicity of DPs compared with the parent compound.